FICTECH – SALT

Cleaning salt remover.

SALT is a decontaminant cleaner for boat decks, hulls, floats, surfs, windsurfing, jets-ski, outboard and in-board motors, sails, ropes, fittings, clothing and waterproof suits un neoprene.

Maybe dilute with seawater.

Reduces the aggressiveness of salt from sea water.

SPECIAL PROFESSIONAL CLEANING FOR MARINE ENGINE COOLING CIRCUITS BEFORE WINTERING.

USE
SHAKE the bottle before use.

DILUTION in sea/fresh water

DILUTE between 10 to 50% depending of the thickness of the dirt and deposits to be removed.

Application in the bath or with venturi systems to spray the non-assoluble supports, with a deck washer, brush, sponge. Let it act for a few moments.

RINSE thoroughly with clean water.

DESALINATION OF ENGINE COOLING CIRCUITS

1-Small outboard engines.

Install the motor on a plastic drum and make a solution in fresh water by adding 5 to 20% of the product SALT.

Depending on the state of fouling, sufficiently immerse the engine foot to run in a closed circuit at slow speed preferably for 5 to 6 minutes by checking the correct discharge rate.

2- In board motors

Close the engine. Close the water intake valve at the hull of the vessel. Place the suction hose in a tray containing 5-20% SALT solution diluted in fresh water and circulate in a closed loop by placing the discharge hose over the tray containing the SALT solution for 5 minutes.

Check during the cleaning that circulation and flow are correct.